Multipanel, being a reputable brand for waterproof wall panels, provides its own adhesive specifically formulated for their panels and keeps your panels in warranty. Using the recommended two tubes of adhesive per panel, ensure that the surface where you'll be applying the panels is clean, dry, and free from any dust, grease, or debris. This will help the adhesive bond properly and this grab adhesive will stick wall panels to most syrfaces (tiles, plasterboard, timber, bricks) etc.

Follow the instructions provided by Multipanel for applying the adhesive. Once the adhesive is applied, gently press the Multipanel panels into place, ensuring they are properly aligned and making full contact with the adhesive. After installing the panels, use clamps or temporary supports to hold them in place while the adhesive cures. This will help prevent the panels from shifting or sliding out of position. Allow the adhesive to fully cure which typically takes at least 24 hours.

Clean up any excess adhesive immediately with a damp cloth before it dries. Once cured, the adhesive can be difficult to remove.

Always follow the instructions provided by Multipanel for the best results when using their adhesive.